The Salem Aeropark group consists of two major manufacturing companies

  • Elastomeric Engineers
  • Aerospace Engineers Private Limited (AEPL)

Elastomeric Engineers was established in the year 1988 to cater the Industrial Oil Fields and Power Sectors in the Non-Metallic components. Ever since the beginning, Elastomeric Engineers has been concentrating in innovating Non-Metallic parts as an opportunity to decrease the Imports of parts done in India for components and assembly.

Elastomeric Engineers started its venture into the Aviation Sector with the encouragement received from Dr. A.P.J Abdul Kalam’s speech in a Defence Seminar conducted in Bengaluru at 1991 as he had highlighted the needs for Non- Metallic parts in the Aerospace Defence Areas.

Post the seminar, we spent 3 – 4 years in learning and understanding the Aviation standards and specifications, Airworthiness Procedure and Expectations and finally developed its first Canopy Seal successfully in 1997 – 98 for Kiran Aircraft which was CEMILAC and DRDO approved.

Elastomeric Engineers is now proud in saying that all military aircrafts in the Indian Sky runs with the Seals from us. In addition to the Canopy Seal, Elastomeric Engineers is also into various other Non- Metallic parts in Aviation and Defence sector.

Aerospace Engineers was established in the year 2000 to specifically cater the growing needs of Aviation, Space, Missiles and CIVIL Aircraft requirements.

The first variety of parts manufactured by Aerospace Engineers were Flameproof Seals, Gaskets, Bellows, Hoses, etc. Aerospace Engineers then entered in manufacturing steel braided and un-braided hose assemblies for Hydraulic Fuel Hot Air lines with suitable end fittings. Aerospace Engineers have developed more than about 300 such assemblies for Aircrafts, Helicopters and Satellites.

Following these were the development and manufacturing of Lubrication Oil Pumps, Various Valves.

With this experience, Aerospace Engineers started manufacturing composite components for Missiles and entered into the manufacturing for civil aircrafts in 2008 and has been serving the civil aviation industry since then.

Aerospace Engineers are very proud in saying that we have manufactured more than 20000 different parts and are always open to new challenging opportunities.

Aerospace Engineers specialises in various areas such as in the Precision machining and manufacturing of Rubber Components, Composites, Electro Mechanical LRU’s, Missiles sub-assemblies, etc to list a few.

The surface Treatment facilities available inhouse at Aerospace Engineers is approved by DRDO, ISRO and are working towards to get the Nadcap certification.

With the increase in the requirement for more manufacturing, Aerospace Engineers are expanding their Capability at SIPCOT, Hosur and are in initial plan phase to create an additional facility in Hyderabad.

The combined motto of both companies is to be 100% self- reliant in the Aviation Sector.

Our Vision:

To become the leader and as benchmark for aerospace manufacturing company.

Our Mission:

To be the benchmark aerospace manufacturing company providing world class quality products to satisfied customers.

Establishing business collaboration and integration with all stakeholders to support competitiveness in cost, quality and delivery.

Promote a culture excellence through continuous improvement techniques driven by the teamwork and resourcefulness of our people.

Our Values:

  • High Ethics
  • Teamwork
  • Safety
  • Openness
  • Empowerment

Business Policy:

The Salem Aeropark is continually striving to improve the Quality of its services and products to its customers and the sales. We use a systematic and a disciplined approach to achieve success and excellence.

We are,

  • Committed to consistently provide, on time products and services that exceeds the expectations and requirements of the customers.
  • Totally committed to the health, safety and welfare of our personnel.
  • Exercise the continuous improvement process in the organization with the objective of Zero Effect and Zero Defect.
  • Strive to continually improve the effectiveness of the Quality Management System and its compliance.

Employee Safety and Commitment:

At Salem Aeropark, our goal for the safety of the employees is clear and simple. This is built based on values like empowerment, openness, trust and teamwork.

We aim to address all workplace injuries thus ensuring the safety of the employees. We value the well – being of our employees above everything and take appropriate actions as we are responsible for each other’s safety.

As we work with multinational companies representing various cultures and stationed at different areas, we ensure that we abide with international principles and communicate it to all our employees across the organization.

We also believe in diversity which helps us to cater all the customer needs effectively. All employees regardless of their position in the company, gender, race, nationality will be treated as one.

Social Commitment:

Our approach to social commitment is very straight forward. As an organization, we see a great opportunity to drive positive change and impact in our society. We focus on supporting the people in need in their education and livelihood enhancement thus ensuring that the business is run with great integrity and responsibility towards the society and also strive for the welfare of our employees and customers and the community we live in.

Environmental Commitment:

Everything we do has an impact on the environment; i.e. from the raw materials we select, the way we, our suppliers / sub- contractors process and manufacture them; the energy used to make those products and transport them to our customers and so on.

In other words, each and every stage in our supply chain gives us an opportunity to make an impact in our environment. To reduce this impact, we have received certification to our organization in accordance to ISO14001 in 2016. Ever since then, we have been working on reducing the environmental impact by continually taking steps which can address them at various stages of our product development cycle.  Doing this, not only addresses our environmental responsibility but also preserves it for our future generations.

1988

June 4, 2018

1988

Elastomeric Engineers, Our Mother Concern Was Inaugurated to Develop and Manufacture of Rubber components for BHEL, Defence, NTPC, NLC, ONGC.

Read more

1993

June 4, 2018

1993

Manufacturing of O-Rings, Gaskets, Seals for Helicopter and Aircraft.

Read more

1998

June 4, 2018

1998

Development of Canopy Seal for Kiran, LCA, IJT,  LCA Trainer.

Read more

2003

June 4, 2018

2003

• Aerospace Engineers steps into manufacturing of Civil Aviation Components. • Development of SU-30 Canopy Seal for HAL. • Design Approval from RCMA.

Read more

2008

June 4, 2018

2008

Aerospace Engineers Embark on Development of Hydraulic Hose Assemblies and Lube oil Pump for ALH.

Read more

2011

June 4, 2018

2011

Inauguration of The Salem Aeropark.

Read more

2015

June 4, 2018

2015

• Development of Composite Components for BRAHMOS and LR-SAM. • Special Process Plant Initiated.

Read more

2017

June 4, 2018

2017

Unit-II Hosur. Development of Tailcone assembly. Gold Rating In ZED Certification. Development of RLV-TD Hydraulic Hose.

Read more